WEEK 7 - Research On The Circuit

• After done about 60% progression of mechanical's part, I think I should do more focus on my electrical's part.
• Starting with do some research on the circuit that been needed for making an electrical's part.
• From my research, to operate my project starting water flow for rotating turbine, then to the output 240V, it need 3 stage of circuit. 
• 1st stage, from turbine, it will generate the motor to produce 12V of DC current, to charging the battery. At that stage, the circuit needed is 'Charging Controller Circuit'.
• 2nd stage, from the 12V DC current output of battery, it need to convert to AC current. This stage, the 'Inverter Circuit' needed to convert DC-AC.
• 3rd stage is about to increase the value of AC current to be an output of 240V. So it need the transformers.

FYP 2 Students,

Azri Sabri

WEEK 6 - Designing The Mechanical's Part

• After done designed turbine in previous week, this week I focus to designing mechanical's part.
• Mechanical's part included tank for water storage, turbine that being connected to motor thru spocket and chain.

Mechanical's Part Of Mini Hydroelectric Turbine.

FYP 2 Students,

Azri Sabri

WEEK 5 - Designing Turbine

• One of the most important part in my project is turbine.
• The rotation or turbine will generate the motor for produce the current.
• the design of the turbine is base on the sample that I been research.

Pelton Turbine

• Base on ideology of pelton turbine, i had designed turbine by my own way using hexagon block and spoon as a blade.
• The turbine as shown in picture below.

FPY 2 Students,

Azri Sabri

WEEK 4 - Purchased Components (Mechanical's Part)

• Looking for components at Jalan Pasar.
• Components use is the important thing to make circuit or project operate.
• Selection of main component should have in a market because some component needs to order from other company such as bearing type 'pillow block'. Only certain shops have it.
• So by listing all the components used first will make easy to find and design the project

FYP 2 Students,

Azri Sabri

WEEK 3 - Research On The Components (Mechanical's Part)

• Starting doing research on the components that being used in my project...
• My project "Mini Hydroelectric Generator" is about how the water energy can produce an electricity.
• So for build on my project, there's got 2 part, which is Mechanical's Part & Electrical's Part.
• For this week, I need to focus on part of mechanical.
• List of components:

1. spoon
2. aquarium tank
3. 'L' aluminium
4. sprocket (2 sizes)
5. bearing (variety sizes)
6. chain
7. screw and nuts
8. cylinder rod

FYP 2 students,
Azri Sabri

WEEK 2 - FYP2 Briefing

• This is a first briefing for S1'2013, which is all students (FYP1&2) has been briefed about the blog, date of presentation, and so on. 
• For students FYP2, they have to proceed for their planning during in FYP1. 
• All the planning have to come out with the hardware. 
• The presentation will be on week 12 for FYP1 and week 14 for FYP2. 
• As a result,the students have been exposed to the project planning.
• The good planning will give a quality result in this project and it is very important. 
• So all FYP2 students this should be done their project 100% before week 14.

FYP 2 students,

Azri Sabri

FYP2: WEEK 1 - Starting Build Project

• This year I continued my project under Final Year Porject 2 subject. 
• I still under with same supervisor, Sir.Azuki Bin Abdul Salam to finalize my project and give some advice to making FYP2. 
• Thus, for the first week of second final year project, I started to make some progress of building my project. 

FYP 2 students,

Azri Sabri